BevMax

BevMax Venture Login

This video demonstrates how to access service mode and UCB programming on a BevMax vending machine or Venture screen. Learn how opening the door activates the service screen, how to enter the UCB setup, and how to navigate audit data and programming options using the toggle menu button. Ideal for quick setup, configuration, and troubleshooting.

BevMax Venture Screen RAM Clear

This video explains how to perform a RAM clear on a UCB control board to restore factory default settings. It walks through entering UCB programming mode, using the correct keypad sequences to clear or retain configuration data, prices, and DEX information, and resetting prices to default values. The video also covers how to complete a DEX initialization to reinitialize MA5 fields, making it ideal for technicians performing resets, reconfiguration, or troubleshooting on UCB-equipped vending machines.

BevMax Model Config

This video shows how to configure a BevMax vending machine using the UCB programming menu. It covers accessing programming mode, navigating to the diagnostic menu, and selecting the correct BevMax model configuration. The video demonstrates how to choose between supported machines, including BevMax 3, 4, and 6 models, as well as 3800 and 5800 series, ensuring the UCB is set to the correct machine type for proper operation.

BevMax Temp

This video explains how to set temperature and disable health enable on a BevMax machine after performing a UCB RAM clear. It walks through accessing the advanced programming menu, entering the required password, adjusting the default temperature, and explains how the UCB regulates cooling cycles. The video also shows how to turn Health Enable off to stop alert beeping when it is not required, making it ideal for post-reset setup and configuration.

BevMax Set Cup Drop

This video demonstrates how to set and calibrate the cup drop position on a BevMax vending machine using the UCB programming menu. It walks through accessing the diagnostic menu, enabling door switches, and running the Set Cup Drop feature. Ideal for ensuring accurate cup placement and reliable dispensing after setup or service.

BevMax Adjust Cup Drop

This video shows how to fine-tune the cup drop position on a BevMax vending machine using the UCB diagnostic menu. It covers navigating to the Cup Drop Adjust feature, enabling door switches, and adjusting both X and Y positions for precise cup alignment.

Need help?

Get the information you need to keep your BevMax running smoothly.